Cport3102R

2-Port Serial RS232/485 to Ethernet Converter
  • Support 2 x RS232/RS485 serial ports working independently.
  • Support Modbus RTU to Modbus TCP protocol conversion.
  • Support 10/100Mbps Ethernet port and support Auto MDI/MDIX
  • Rugged metal housing with IP30 protection for wall or optional DIN-Rail mount
  • Support a wide industrial operating temperature,-40℃~85℃

Cport3102R is 2-port serial to Ethernet converter. It adopts the Cortex-M7 solution, which has a main frequency up to 400MHz, powerful performance, fast transmission speed, and high reliability. Equipped with a deeply optimized TCP/IP stack, built-in hardware and software watchdog and a variety of keepalive mechanisms, Cport3102 keeps online all the time. It supports TCP Client, TCP Server, UDP Client, UDP Server and HTTPD Client working modes, achieves data transparent transmission via simple configuration.

The Cport3102 supports Modbus RTU Master for retrieving field site data from serial meters. After collecting data, users can convert serial data to MQTT json format data, allowing users to get field site data. This two-in-one design reduces system complexity and the amount of space required in the network topology, as well as overall installation time.

Product Features;

  • Support 2 serial ports working independently.
  • Support 5V-36V wide voltage input, with reverse polarity protection.
  • Support Modbus RTU to Modbus TCP protocol conversion.
  • Support the keepalive mechanism to quickly detect dead connections and reconnect.
  • Support hardware watchdog, which automatically restarts when the device goes down.
  • Provide remote serial access over the Internet for industrial serial devices
  • 10/100Mbps Ethernet port and support Auto MDI/MDIX
  • Software selectable RS-232/422/485 3-in-1 serial port(N5X0 models)
  • Rugged metal housing with IP30 protection for wall or optional DIN-Rail mount
  • Built-in 15KV ESD serial port protection
  • Flexible serial port data framing setting, which can satisfy user’s various demands for data packets segmentation
  • It supports Modbus TCP and Modbus RTU protocol mutual conversion, a multi-host polling function.
  • The device conforms to industrial design standards. Reliable EMC protection and -40~85℃ operating temperature make it endure various complex industrial scenarios.
  • Each serial port supports connecting to two different servers at the same time. Two sockets are mutually backed up, providing higher reliability and better flexibility
Item Parameter Description
Hardware Parameters Input Voltage DC 5V~36V
Input Current Mean: 69mA @12V
Dimensions 150mm * 98.8mm *30mm (L*W*H, including terminals and mounting ears)
Installation Rock Mount
Ground Screw 1
Operating Temperature -40℃~85℃
Storage Temperature -40℃~ 105℃
Operating Humidity 5%~95% RH(non-condensing)
Storage Humidity 5%~95% RH(non-condensing)
Certifications CE/FCC/ROHS
Interface Parameters Ethernet Port Spec. RJ45, 10/100Mbps, auto MDI/MDIX
Ethernet Port No. 1
Serial signals RS-232: TxD, RxD, RTS, CTS, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w: A+, B-, GND
Serial Port No. 2
Serial Baud Rate 600-230.4K(bps)
Data Bit 7, 8
Parity None, Even, Odd, Mark, Space
Flow Control None, RTS/CTS (RS-232 only), XON/XOFF
RS-485 Pull-up and Pull-down Resistor 2.2KΩ
Hardware Protection ESD-IEC61000-4-2 Level 4 Air±15KV, contact±8KV
Surge-IEC61000-4-5 level 3 ±2KV
EFT-IEC61000-4-4 Level 3 ±2KV
Software Parameters Network Protocols TCP,UDP,IPV4,ARP,ICMP,DHCP,NTP,HTTP,TLS/SSL V3,DNS,IGMP,SNMP V1/V2C,MQTT
IP Mode Static IP, DHCP
Modbus Gateway Support
Websocket Support
HTTP Client Support
UDP Broadcast/Multicast Support
User Configuring Setup utility, webpage, AT commands
Serial Packets Cache Dynamic packet cache.
For example:
When the packet length is 10 byte, the serial port can cache 450 packets(4.5KB).
When the packet length is 1460 bytes, the serial port can cache 10 packets( 14.6KB).
Ethernet Packets Cache 48Kbyte

Cport3102 Series Datasheet

Version Update Download
V1.0 2025-05-08
PDF
(354.62 KB)
Model Serial standards Connector Serial signals
Cport3102 RS232/RS485/RS422 Standard DB9 male RS232/485/422 × 1:   RXD,   TXD,   GND, RTS, CTS, T+(A+), T-(B-),R+,R-
Cport3102R RS232/RS485 RS232:Standard DB9 male

RS485: 3Pin industrial terminal

RS232:  RXD, TXD, GND, RTS, CTS

RS485: A+,B-,GND

cport3101r 485

Cport3101R-485

RS485 to Ethernet Serial Server

cport3101r 232

Cport3101R-232

RS232 to Ethernet Serial Server

ciap315r 1a25 232

CIAP315R-1A25-232

Serial to Dual Band Wi-Fi Converter

cport3102

Cport3102

2-Port Serial RS232/422/485 to Ethernet Converter

ciap314r 1a2 485

CIAP314R-1A2-232

2.4G, IEEE 802.11 b/g/n Wi-Fi 4 Industrial Wireless Client

ciap326 2a25 2d

CIAP326-2A25-2D

Dual Band Wi-Fi Device Server

Contact Form

Thanks for your interest in our products. Please fill out the form below, we’ll reply within 24 hours.