CES5105C series is a layer 2 100M network managed embedded switch. It supports 5*100M Ethernet ports and 2*S232/ RS485/CAN or RS485+CAN optional, integrated with serial port device networking or CAN device networking. CES5105C-2F comes with 2*fiber and 3*copper ports; CES5105C-3F comes with 3*fiber and 3*copper ports. The switch adopts a store-and-forward mechanism and has powerful bandwidth processing capabilities to automatically troubleshoot data packet errors, reduce transmission failures, and ensure stable, reliable, and efficient data transmission. In line with high-standard system design and production control, it adopts embedded installation method, operates in a wide temperature range of -40℃~+75℃, can adapt to various harsh working environments, and has stable communication performance.
CES5105C series supports a range of features and network protocols, such as MW-Ringv1/v2, STP/RSTP, VLAN, QoS, port mirroring, static multicast, MAC address binding, network diagnosis, alarm and system online upgrade, etc., which can improve the performance, reliability and security of the network and meet the needs of requirements of various complex networks. Supports various network transmission modes such as UDP, TCP Client, TCP Server, UDP multicast, etc., to realize networking of serial port terminal devices. It meets the demands of complex networks and harsh industrial environments and can be widely applied in areas such as comprehensive energy, smart cities, rail transportation, intelligent traffic, smart factories, industrial automation, and more.
| Software | |
| Switching | Support port configuration, port rate configuration, storm detection, port aggregation, and port statistics
Support 802.1Q VLAN and port-based VLAN Support MAC address aging |
| CAN/Serial | Supports UDP, TCP Client, TCP Server, UDP multicast and other network working modes
Supports statistics on the number of bytes sent and received by serial port and network Supports CAN working modes such as normal mode, monitoring mode, loopback mode, etc. Support CAN ID filtering, CAN frame statistics |
| Redundancy | Support MW-Ringv1/v2 proprietary ring network technology
Support RSTP (Rapid Spanning Tree Protocol) and is compatible with STP (Spanning Tree Protocol) |
| Multicast | Support static multicast MAC address binding |
| Management and Maintenance | Support static IP
Support QoS quality of service, 802.1P/DSCP/port priority mapping, absolute and relative priority control Support port mirroring, ping, alarm Supports user management with different permissions, online restart, factory reset, system upgrade, and configuration file upload/download Support MixView, MaxView management |
| Switch Capability | |
| Processing Type | Store-and-Forward |
| Backplane Bandwidth | 1.2Gbps |
| Buffer Size | 768kbit |
| MAC Table Size | 2K |
| Interface | |
| 100M Fiber Port | 2/3*100Base-FX fiber ports, support single-mode/multi-mode, SC/FC/ST connector, wavelength and transmission distance optional |
| 100M Copper Port | 3/2*10/100Base-T(X) auto-sensing copper ports, support full/half duplex, auto MDI/MDI-X connection |
| Serial Port | Interface type: 2*RS232 or 1/2*RS485
Interface signals: A+/TX, B-/RX, GND Baud rate: 600bps-115200bps Data bits: 7bit, 8bit Stop bit: 1bit, 2bit Check digit: none, odd parity, even parity, Mark, Space Connection method: 6-position 3.81mm pitch locking terminal blocks Terminal resistor: built-in 120Ω terminal resistor, which can be set by jumper cap |
| CAN Port | Interface type: 1/2 CAN port optional
Interface signals: CANH, CANL, GND Baud rate: 5kbps-1000kbps Connection method: 6-position 3.81mm pitch locking terminal blocks Terminal resistor: built-in 120Ω terminal resistor, which can be set by jumper cap |
| Button | Restart and factory reset button |
| Statue LED | Power indicator light, operation indicator light, interface indicator light, electrical port speed indicator light, serial port/CAN indicator light, support external indicator light signals |
| Power Supply | |
| Input Voltage | DC 9-36V, reverse polarity protection |
| Power Consumption | ＜3.5W@DC24V |
| Connect | 2-position 5.08mm pitch locking terminal blocks |
| Physical Characteristics | |
| Dimensions | 114×90×14.7 mm |
| Installations | Embedded installation |
| Weight | 0.12kg |
| Working Environment | |
| Operating Temp | -40℃~+75℃ |
| Storage Temp | -40℃~+85℃ |
| Relative Humidity | 5%~95% (non-condensing) |
| Industry Standard | |
| EMC | IEC 61000-4-5 (Surge): Level 2 ※The network port supports 6kV lightning protection
IEC 61000-4-4 (EFT): Level 3 |
| Certification | CE, FCC, RoHS |
| Version | Update | Download |
|---|---|---|
| V1.0 | 2025-02-27 |
PDF
(219.39 KB)
|
| Standard Model | 100M Fiber Port |
100M Copper Port |
RS232 | RS485 | CAN | Input Voltage |
| CES5105C-2F(M/S)-2D232 | 2 | 3 | 2 | / | / | DC6-32V |
| CES5105C-2F(M/S)-2D485 | 2 | 3 | / | 2 | / | |
| CES5105C-2F(M/S)-D485-CAN | 2 | 3 | / | 1 | 1 | |
| CES5105C-2F(M/S)-2CAN | 2 | 3 | / | / | 2 | |
| CES5105C-3F(M/S)-2D232 | 3 | 2 | 2 | / | / | |
| CES5105C-3F(M/S)-2D485 | 3 | 2 | / | 2 | / | |
| CES5105C-3F(M/S)-D485-CAN | 3 | 2 | / | 1 | 1 | |
| CES5105C-3F(M/S)-2CAN | 3 | 2 | / | / | 2 |
Fast Lead Time, Max.7 Days
1,000 Units Ready in 2 Weeks
50 Units Ready in Just 3 Days
200+ Tailored OEM Solutions
24Y Proven Industrial Expertise
Stay up to date with the latest products, news and solutions
Thanks for your interest in our products. Please fill out the form below, we’ll reply within 24 hours.
