CES5105C series is a layer 2 100M network managed embedded switch. It supports 5*100M Ethernet ports and 2*S232/ RS485/CAN or RS485+CAN optional, integrated with serial port device networking or CAN device networking. CES5105C-2F comes with 2*fiber and 3*copper ports; CES5105C-3F comes with 3*fiber and 3*copper ports. The switch adopts a store-and-forward mechanism and has powerful bandwidth processing capabilities to automatically troubleshoot data packet errors, reduce transmission failures, and ensure stable, reliable, and efficient data transmission. In line with high-standard system design and production control, it adopts embedded installation method, operates in a wide temperature range of -40℃~+75℃, can adapt to various harsh working environments, and has stable communication performance.
CES5105C series supports a range of features and network protocols, such as MW-Ringv1/v2, STP/RSTP, VLAN, QoS, port mirroring, static multicast, MAC address binding, network diagnosis, alarm and system online upgrade, etc., which can improve the performance, reliability and security of the network and meet the needs of requirements of various complex networks. Supports various network transmission modes such as UDP, TCP Client, TCP Server, UDP multicast, etc., to realize networking of serial port terminal devices. It meets the demands of complex networks and harsh industrial environments and can be widely applied in areas such as comprehensive energy, smart cities, rail transportation, intelligent traffic, smart factories, industrial automation, and more.
| Programas | |
| Trocando | Support port configuration, port rate configuration, storm detection, port aggregation, and port statistics
Suporte 802.1Q VLAN e VLAN baseada em porta Suporte ao envelhecimento do endereço MAC |
| CAN/Serial | Supports UDP, TCP Client, TCP Server, UDP multicast and other network working modes
Supports statistics on the number of bytes sent and received by serial port and network Supports CAN working modes such as normal mode, monitoring mode, loopback mode, etc. Support CAN ID filtering, CAN frame statistics |
| Redundância | Suporte à tecnologia de rede em anel proprietária MW-Ringv1/v2
Suporta RSTP (Rapid Spanning Tree Protocol) e é compatível com STP (Spanning Tree Protocol) |
| Multidifusão | Suporte a ligação de endereço MAC multicast estático |
| Gestão e Manutenção | Suporte IP estático
Suporte à qualidade de serviço QoS, mapeamento de prioridade de porta 802.1P/DSCP, controle de prioridade absoluta e relativa Suporte a espelhamento de porta, ping, alarme Supports user management with different permissions, online restart, factory reset, system upgrade, and configuration file upload/download Suporte MixView, gerenciamento MaxView |
| Capacidade de troca | |
| Tipo de processamento | Armazenar e encaminhar |
| Largura de banda do backplane | 1,2 Gbps |
| Tamanho do buffer | 768 kbits |
| Tamanho da tabela MAC | 2K |
| Interface | |
| Porta de fibra 100M | 2/3*100Base-FX fiber ports, support single-mode/multi-mode, SC/FC/ST connector, wavelength and transmission distance optional |
| Porto de cobre de 100M | 3/2*10/100Base-T(X) auto-sensing copper ports, support full/half duplex, auto MDI/MDI-X connection |
| Porta serial | Interface type: 2*RS232 or 1/2*RS485
Interface signals: A+/TX, B-/RX, GND Taxa de transmissão: 600bps-115200bps Bits de dados: 7 bits, 8 bits Bit de parada: 1 bit, 2 bits Check digit: none, odd parity, even parity, Mark, Space Connection method: 6-position 3.81mm pitch locking terminal blocks Terminal resistor: built-in 120Ω terminal resistor, which can be set by jumper cap |
| Porta CAN | Interface type: 1/2 CAN port optional
Sinais de interface: CANH, CANL, GND Taxa de transmissão: 5 kbps-1000 kbps Connection method: 6-position 3.81mm pitch locking terminal blocks Terminal resistor: built-in 120Ω terminal resistor, which can be set by jumper cap |
| Botão | Botão de reinicialização e redefinição de fábrica |
| Estátua LED | Power indicator light, operation indicator light, interface indicator light, electrical port speed indicator light, serial port/CAN indicator light, support external indicator light signals |
| Fonte de energia | |
| Tensão de entrada | DC 9-36V, reverse polarity protection |
| Consumo de energia | ＜3.5W@DC24V |
| Conectar | Blocos de terminais de travamento de passo de 5,08 mm e 2 posições |
| Características físicas | |
| Dimensões | 114×90×14.7 mm |
| Instalações | Instalação incorporada |
| Peso | 0,12 kg |
| Ambiente de trabalho | |
| Temperatura de operação | -40℃~+75℃ |
| Temperatura de armazenamento | -40℃~+85℃ |
| Humidade relativa | 5%~95% (sem condensação) |
| Padrão da indústria | |
| CEM | IEC 61000-4-5 (Surge): Nível 2 ※A porta de rede suporta proteção contra raios de 6 kV
IEC 61000-4-4 (EFT): Nível 3 |
| Certificação | CE, FCC, RoHS |
| Versão | Atualizar | Download |
|---|---|---|
| V1.0 | 2025-02-27 |
PDF
(219,39 KB)
|
| Modelo Padrão | 100M Fibra Porta |
100M Copper Port |
RS232 | RS485 | PODE | Tensão de entrada |
| CES5105C-2F(M/S)-2D232 | 2 | 3 | 2 | / | / | DC6-32V |
| CES5105C-2F(M/S)-2D485 | 2 | 3 | / | 2 | / | |
| CES5105C-2F(M/S)-D485-CAN | 2 | 3 | / | 1 | 1 | |
| CES5105C-2F(M/S)-2CAN | 2 | 3 | / | / | 2 | |
| CES5105C-3F(M/S)-2D232 | 3 | 2 | 2 | / | / | |
| CES5105C-3F(M/S)-2D485 | 3 | 2 | / | 2 | / | |
| CES5105C-3F(M/S)-D485-CAN | 3 | 2 | / | 1 | 1 | |
| CES5105C-3F(M/S)-2CAN | 3 | 2 | / | / | 2 |
Prazo de entrega rápido, máximo de 7 dias
1.000 unidades prontas em 2 semanas
50 unidades prontas em apenas 3 dias
Mais de 200 soluções OEM personalizadas
Experiência industrial comprovada por 24 anos
Mantenha-se atualizado com os últimos produtos, notícias e soluções
Obrigado pelo seu interesse em nossos produtos. Por favor, preencha o formulário abaixo, responderemos em até 24 horas.
