CS-CANET300

CS-CANET300 Ethernet CAN Server supports 1 100M Ethernet RJ45port and 1*CAN-bus + 1*RS232/485 interfaces for networking, which adopts 32-bit Arm Cortex-M7 core CPU, up to nearly 400MHz main frequency. Each interface is independent of each other, does not affect each other, and can be configured into different modes and baud rates.

The industrial-grade CAN server supports WEB configuration of various network management functions, such as CAN/serial port/network working mode, port information, network address, user password, system information, system management, etc.; supports UDP/UDP Multicast, TCP Client/Server, Modbus TCP Slave, Modbus RTU Master/Slave, Modbus ASCII Master/Slave, Pair Connection Master/Slave, HTTPD Client, WebSocket Client and other conversion modes to realize CAN and serial port to Ethernet or Modbus TCP protocol; supports transparent conversion, transparent conversion with identification, format conversion, Modbus conversion and other conversion modes to realize CAN to serial port or Modbus RTU protocol. For core components, the product adopts industrial-grade quality design solutions, and has many advantages such as wide temperature and voltage, lightning resistance, electromagnetic interference resistance, high reliability, high performance, and suitability for operation in harsh environments. It can be used for fire alarm, industrial monitoring, traffic management, meteorology, water treatment, environmental monitoring, coal mining, petroleum, chemical industry, new energy and other industries. It can be used for remote field data collection, remote monitoring, field control, etc. It is an indispensable industrial communication product for the development of industrial Internet of Things.

Produktegenskaber

• Using 32-bit ARM Cortex-M7 core, the operating frequency is up to 400MHz;
• The CAN port supports 5kbps~1000kbps baud rate, and the serial port supports 600bps~460800bps baud rate;
• Support UDP and UDP Multicast modes, and point-to-point, point-to-many or many-to-many communication can be achieved through the UDP protocol, which is fast and efficient;
• Support TCP Client/Server mode, establish a session connection through the TCP protocol, and support up to 4-way session connection;
• Support Pair Connection Master/Slave mode, the device can be used in pairs, and the operation is simple;
• Support Modbus TCP Slave mode, and realize Modbus TCP and CAN bus protocol conversion through read and write instruction mapping;
• Support Modbus RTU/ASCII Master/Slave mode, and realize Modbus TCP and Modbus RTU/ASCII protocol conversion;
• Support CAN to Serial mode, providing transparent conversion, transparent conversion with identification, format conversion or Modbus conversion to realize CAN to serial port;
• Support HTTPD Client mode, can perform GET or POST operations with HTTPD server;
• Support WebSocket Client mode, can communicate with WebSocket server in two directions;
• Support multiple packetization mechanisms, convert CAN data into Ethernet data packets according to data length or time, to meet different network real-time requirements;
• Support frame header and frame tail mode, the serial port can filter data frames according to the start byte and end byte of the frame;
• Support Modbus slave pre-reading, automatic learning instructions, pre-reading data to achieve fast response;
• Support registration package and heartbeat package to achieve connection verification and connection status detection;
• Support CAN standard frame ID and extended frame ID filtering;
• Support bus port sending and receiving frame count, network connection information statistics;
• Support different authority user management;
• Support CAN port and serial port online restart, device restart, factory reset and upgrade.”