CSE485-TD is a high-speed isolation RS232 to RS485/422 interface converter. It can achieve bidirectional data conversion between serial ports, and the converter can automatically detect the baud rate of the serial port and be convenient to use, the data flow will not loss even if the baud rate of the device changes. It uses I/O circuit to automatically control the direction of data flow, no need the handshake signal settings, ensuring compliance with existing communication software and interface hardware. It supports hot plug and can operate stably even in temperature environments ranging from -40 ℃ to +85 ℃. It can be widely used in indoor and outdoor serial field-bus systems.
| 介面 | |
| 序列埠 | 標準：符合EIA RS232、RS485和RS422標準
Number of port: 1xRS232 and 1xRS485/422 RS232訊號：TX、RX、GND RS485/422 signal: A+/T+, B-/T-, GND, R+, R- 波特率：300bps～115200bps Communication distance: RS232: 5m. RS485/42:1.2km(19200bps) Load capacity: RS485/422 support 128 nodes polling Direction control: RS485 data flow direction auto control Connection method: RS232: DB9F RS485/422: 5.08mm pitch 10-pin terminal block 連接埠保護：15kV靜電保護和600W/ms雷電保護 光電隔離：2.5kV |
| 狀態 LED | 電源LED、資料發送LED、資料接收LED |
| 電源 | |
| 電源輸入 | DC5V或DC9~30V |
| 工作電流 | <15毫安 |
| 聯繫 | 5.08mm間距10針接線端子，3針用於電源 |
| 物理特性 | |
| 方面 | 103×72×34 mm(DIN rail mounting clip excluded) |
| 安裝 | 輕鬆安裝在 35 毫米 DIN 導軌上 |
| 重量 | 約82克 |
| 工作環境 | |
| 工作溫度 | -40℃~+85℃ |
| 儲存溫度 | -40℃~+85℃ |
| 相對濕度 | 5%~95% (非凝結) |
| 標準模型 | RS232 | RS485/422 | 電源電壓 |
| CSE485-TD | 1 | 1 | DC5V或DC9~30V |
交貨時間快，最多 7 天
兩週內完成 1,000 台
只需3天即可完成50個單元
200+ 客製化 OEM 解決方案
24年成熟的行業專業知識
感謝您對我們產品的興趣。請填寫下面的表格，我們將在 24 小時內回覆。
