CIAP325-3A25-2D

جهاز Wi-Fi 5 ثنائي النطاق بسرعة 100 ميجابت في الثانية مع منفذين للبيانات، وعميل لاسلكي صناعي مثبت على سكة حديدية

2 منافذ LAN بسرعة 100 ميجابت في الثانية، و1 منفذ RS232، و1 منفذ RS485 تسلسلي
واجهات هوائي 2×2.4 جيجاهرتز و1×5 جيجاهرتز
يدعم الوصول إلى المحطة اللاسلكية، وإخفاء SSID، وعزل المستخدم، وجسر WDS، وما إلى ذلك.
غلاف من سبائك الألومنيوم عالية القوة، مستوى حماية IP40
مصمم للعمل في درجات حرارة تتراوح من -40 درجة مئوية إلى +75 درجة مئوية

CIAP325-3A25-2D is a DIN-rail mounted dual-band Wi-Fi 5 industrial wireless client designed to connect wired and serial devices to wireless networks in harsh industrial environments. With support for both 2.4GHz and 5GHz frequency bands, the device ensures stable, high-speed wireless communication for field applications such as automation, energy systems, and intelligent infrastructure.

This model features:

2×100M LAN ports, 1×RS232, and 1×RS485 serial ports
2×2.4GHz and 1×5GHz antenna interfaces
DC9–36V wide voltage input and standard DIN-rail mounting
Industrial-grade aluminum housing, built for -40°C to +75°C operation

CIAP325-3A25-2D supports a full suite of network management features via WEB UI, including client/WDS/NAT modes, IPv6, enhanced roaming, DHCP, firewall, serial-to-network, user-level management, and remote/local logs. It also enables firmware upgrades, configuration backup/restore, and scheduled reboot.

Built with industrial-grade components, it meets rigorous safety, EMC, and temperature standards, making it ideal for use in industrial automation, smart cities, intelligent transportation, smart mines, and factory networks.

مميزات المنتج

Support client mode, which can convert a wireless network into a wired network and enable a wired terminal to access a wireless network.
Wireless NAT supports DHCP protocol, static address, and other methods to connect to the external network;
Support IP address conflict detection, quickly locate IP conflict source, and avoid network failure;
Support DHCP server, centrally manage and configure user IP addresses dynamically;
Support a wireless access point, which can convert a wired network into a wireless network and enable wireless terminals to access the wired network;
Support WEP-OPEN/SHARE-AUTH, WPA/WPA2-PSK encryption methods, CCMP, TKIP encryption algorithms;
Support IPv4/IPv6 Ping, IPv4/IPv6 Traceroute, Nslookup, and packet capture can be used for network diagnosis or fault analysis.
The firewall supports port mapping, iptables command custom rules, NAT conversion, and other functions;
Support NTP client and server functions, and can synchronize clocks or provide clock sources.
Support hierarchical management of user permissions, and supports SSH, HTTP/HTTPS access control.
Log information records kernel, application, and network information at various levels, and supports local download, timed storage, and remote monitoring.
Wireless NAT supports DHCP protocol, static address, and other methods to connect to the external network.
Support serial port to network, and provides UDP Client/ Server/ Multicast, TCP Client/Server, Modbus RTU Master/Slave, Modbus ASCII Master/Slave, Realcom MCP/CCP/MW, Pair Connection Master/Slave, Httpd Client, WebSocket Client, MQTT Client, OPC UA Server, IEC104 Server, HJ212 Client and other network modes, realizing serial port to TCP, UDP, HTTPD, WebSocket, MQTT, Modbus RTU/ASCII to Modbus TCP, OPC UA, IEC104, HJ212, etc.;
Support JSON function, which can convert the collected Modbus slave device data into JSON format and send it to the server.

ميزات البرنامج
NMS Function	Status information such as traffic statistics, running status, network status, and local address is supported IPv6 services and IP address conflict detection are supported Support client mode, WDS/universal/wireless NAT connection mode Support client enhanced roaming function and wireless parameters DHCP servers are supported Support serial port to network
جدار الحماية	WAN/LAN port TCP/UDP port mapping is supported NAT network address translation is supported Custom rules for iptables are supported
System Administration	يدعم IPv4/IPv6 Ping、IPv4/IPv6 Traceroute、Nslookup、Capture network packets Supports time zone, NTP client/server, Crontab, remote/local logging Supports user rights management, SSH, HTTP/HTTPS access control, and certificate upload It supports online reboot, scheduled restart, configuration backup/restore, flashing firmware, and factory reset
Wi-F radio frequency parameters
المعايير اللاسلكية	IEEE 802.11a/b/g/n/ac
Operating Frequency Band	2.412GHz~2.484GHz, 5.18GHz~5.825GHz
عرض النطاق الترددي للقناة	20 ميجا هرتز/40 ميجا هرتز/80 ميجا هرتز
أقصى طاقة إرسال	IEEE 802.11ac：22±2dBm @HT80 MCS9 /5GHz band IEEE 802.11ac：22±2dBm @HT80 MCS0 /5GHz band IEEE 802.11n：24dBm @HT20/40 MCS7 IEEE 802.11g：25dBm @54MHz IEEE 802.11b：28dBm @11MHz
حساسية الاستقبال	VHT80 MCS9:-58dBm@10%PER(MCS9) /5GHz band HT40 MCS7:-69 ديسيبل ميلي واط عند 10% لكل (MCS7) HT20 MCS7:-71dBm@10% PER(MCS7) 54M:-74dBm@10% FOR 11M:-90dBm@ 8% FOR
الحد الأقصى لمعدل النقل (theoretical).	The maximum transmission rate of 2T2R in the 2.412GHz~2.484GHz frequency band is 300Mbps The maximum transmission rate of 1T1R in the 5.18GHz~5.825GHz frequency band is 433Mbps The theoretical maximum wireless bandwidth is 733Mbps
Distance Covered	2.4GHz coverage radius up to 400m (outdoor air/no interference environment, 5dBi omnidirectional antenna) 5GHz coverage radius up to 700m (outdoor air/interference-free environment, 5dBi omnidirectional antenna)
Interface Specifications
100 مليون شبكة محلية	2 x 10/100Base-T(X) auto-sensing RJ45 LAN ports, supporting full/half-duplex and auto MDI/MDI-X
Serial	Serial port type: 1RS232 and 1RS485 serial port Connection: 7-position 3.81mm pitch terminal, serial port occupies 5 positions Baud rate:600bps~460800bps Data bit: 7bit, 8bit Stop bit: 1bit, 2bit Check digit: None, Odd, Even Number of nodes: RS-485 can connect up to 128 nodes Termination Resistor: RS485 has a built-in 120Ω termination resistor, which can be switched by internal jumper caps
واجهة الهوائي	3SMA-K (Male Threaded Internal Hole) antenna connectors, including 22.4GHz Wi-Fi antennas and 1*5GHz Wi-Fi antennas
وحدة التحكم	1*CONSOLE port, using USB Type-C interface
Keystroke	Reboot or factory reset button
Light	Power indicator, running indicator, 2.4G indicator, 5G indicator, RS232 indicator, RS485 indicator, Ethernet interface indicator
معلمات مصدر الطاقة
مدخلات الطاقة	تيار مستمر 9~36 فولت
Power Consumption at full load	＜5.5W@DC24V
اتصال	7-position 3.81mm pitch terminal block, power supply occupies 2 positions
حماية الطاقة	اتصال مضاد للانعكاس
Mechanical Parameters
أبعاد	118×35×88 mm
تثبيت	تركيب سكة DIN قياسية مقاس 35 مم
رمز IP	Aluminum alloy shell, IP40 protection level
وزن	Approx. 0.35kg (without antenna).
Working environment
درجة حرارة التشغيل	-40 درجة مئوية ~ +75 درجة مئوية
درجة حرارة التخزين	-40 درجة مئوية ~ +85 درجة مئوية
الرطوبة النسبية	5%~95% (بدون تكاثف)
معايير الصناعة
التوافق الكهرومغناطيسي	IEC 61000-4-2 (ESD): المستوى 4 (تفريغ التلامس ± 8 كيلو فولت، تفريغ الهواء ± 15 كيلو فولت) IEC 61000-4-5(Surge):Level 3 (Power supply: Common mode ±2kV, differential mode ±1kV; Network port: Common mode ±6kV, differential mode ±2kV; RS485: Common mode ±4kV, differential mode ±2kV) IEC 61000-4-4(EFT): Level 4 (Power supply: ±4kV; Ethernet port: ±2kV)

نموذج	100 مليون شبكة محلية	RS232	RS485	هوائي 2.4 جيجاهرتز	5GHz antenna	Power range
CIAP325-3A25-2D	2	1	1	2	1	DC9V~36V

CIAP325-3A25-2D

CIAP314-1A2-2D

CIAP315R-1A25-232

CIAP314R-1A2-232

CIAP326-2A25-2D

CIAP325-2A25-2D

CIAP315R-1A25-485

منتجات

شركة

يدعم

CIAP325-3A25-2D

CIAP314-1A2-2D

CIAP315R-1A25-232

CIAP314R-1A2-232

CIAP326-2A25-2D

CIAP325-2A25-2D

CIAP315R-1A25-485

منتجات

شركة

يدعم

نموذج الاتصال